Gyrocompass Features
Automatic static north speed error correction - no extra unit required
High-speed transmission and follow-up system 100° / sec
Highly accurate digital heading data transmission by a shaft encoder
Twin rotors (19,000 rev / min) and liquid damping system eliminate latitude error
A ±180° electronic alignment error correction in the setup program (mechanical correction is not necessary)
MTBF of 40,000 hours & Maintenance intervals of 18 months
Insensitive to horizontal acceleration
Will drive a maximum of 12 analogue repeaters
Two independent 6 steps/degree heading outputs (0.5 A)
Performance in accordance with IMO
A.424(XI), A.694(17), and ISO 8728
MED (Wheelmark) approval
Comprises one single unit
Power supply: two independent 24 VDC
inputs
Control and display unit (not removable)
in front cover with 4-digit heading
display and 6 operating keys
Heading accuracy
— Static ≤ 0.1° secant latitude
— Dynamic ≤ 0.4° secant latitude
— Settle point ≤ 0.1° secant latitude
error
correction – no extra unit required
Rate-of-turn output
High speed transmission and follow-up
system 100°/sec
Highly accurate heading data
transmission by means of shaft encoder
Self-aligning repeater compasses with
serial interface IEC-61162-1 / RS 422
Gyro system remains north-stabilized
during power interruptions within the
required accuracy
Twin rotors (19,000 rev./min.) and liquid
damping system eliminate latitude error
± 180° electronic alignment error
correction in setup program (mechanical
correction is not necessary)
High MTBF (40,000 hours)
Monitoring and alarm functions for all
voltages, gyroscope current and follow-
up system
Short maintenance and repair times –
low service costs.
Contact Us, Our engineers have a big experience overhauling, repair, installation and general servicing of Sperry Marine, Yokogawa, Anschutz and Tokimec gyro compass systems.
Email : shipservices.id@gmail.com
Site : Shipservices.id